Energy Isolation
Tickets
Registrations are closed
Energy Isolation
Energy Isolation
23 -
27
Jun
2024
Kuala Lumpur,
Malaysia
What are the Goals?
By the end of this intensive training course, participants will learn to:
- Demonstrate familiarity with the principals of Energy Isolation
- Demonstrate a basic understanding energy sources
- Demonstrate a basic awareness of procedures standards and practices
- Understand the need for implementing Safe Systems of Work
- Understand common terminology related to isolations and control
- Understand common energy hazards
- Understand the differences between Best Practice and Minimum requirement for Energy Isolation
- Understand the purpose, principles and practices of isolation procedures and safety rules – for their own role, and for others involved in the operation of isolations systems and the legal issues associated with same
- Identify Primary Isolation practices versus Positive Isolation practices; including where and when each is used. Also understand industry terms associated with these objectives.
- Identify the different pieces of equipment used in positive isolation including where and when they should be utilized
- Identify the hazards pertaining to loss of containment and personal injury, conduct risk assessment and identify Risk Reduction measures using the As Low as Reasonably Practicable (ALARP) qualification
- Describe the Roles and Responsibilities with achieving safe and reliable process isolation
- Describe the stages involved in achieving safe process isolations and demonstrate their ability to design and implement the various forms of process isolations in a range of scenarios
- Demonstrate their ability to safely re-instate plant
Who is this Training Course for?
This training course is suitable to a wide range of professionals but will greatly benefit:
- Operatives/Employees working with Processes
- Operatives/Employees working with Machines or equipment in which the sudden release of energy could cause injury or damage
- Persons with specific plant responsibility
- Persons with Technical executive function
- Qualified Supervisors within an Energy Isolation environment
- Plant Operators and Operator Technicians within the Onshore and Offshore Oil and Gas Industry
- Plant Operators and Operator Technicians within the Petrochemical and Manufacturing Industry
- Any other plant personnel directly responsible for performing Safe Process Isolations
- Any other plant personnel indirectly responsible for performing Safe Process Isolations. Such persons may include Senior Operational Managers and anyone who monitors, audits and reviews isolations systems.
Daily Agenda
Day One: Energy, Legislative Requirements and Codes of Practice
- What is Energy
- Common Energy Sources
- OSHA requirements and Electricity at Work Regulations
- Procedures, Standards and Approved Codes of Practice
Day Two: Safe Systems of Work, Electrical Isolation and LOTO
- Introduction to Energy Isolation (Electrical)
- Safe Systems of Work
- Safe working practices
- Electrical Isolations and Techniques
- LOTO requirements
- Earthing requirements for isolation
- Issues/problems associated with Electrical Isolation
Day Three: Documentation, Instrumentation, Control and Associated Mechanical Systems
- Isolation Confirmation Certificates
- Introduction to Energy Isolation (Instrumentation)
- Instrument isolation Techniques
- Intrinsically safe systems and dangers associated with Intrinsic safety
- Safe Systems of Work
- ELV isolation for Instrument energy sources
- ‘Block and Bleed’ Techniques
- Isolation of Instrument piping
- Isolation of Instrument devices used in process control
- Issues/problems associated with Instrumentation Isolation
Day Four: Mechanical Systems, Hydraulics, Pneumatics and Potentially Explosive Energy
- Introduction to Energy Isolation (Mechanical)
- Safe Systems of Work and Safe working practices
- Mechanical Isolation Techniques
- Valves, Gearboxes and Motors
- Piping, Pipe Flanges and Joints
- Hydraulic and Pneumatic Isolation
- Issues/problems associated with Mechanical Isolation
- Introduction to Potentially Explosive Atmospheres
- Standards and Good practices
Day Five: Potentially Explosive Energy and Concepts
- Safe working practices
- Overview of Potential Electrical Energy release risks
- Overview of Potential Instrument Energy release risks
- Overview of Potential Mechanical Energy release risks
- Ignition Energy Assessment of process/Oil & Gas operations
- Overview of Equipment concepts (Ex d, Ex e, Ex n, Ex i, d, c, k, b, Fr)
Tickets
Registrations are closed
Related Cources
CyberSec First Responder (CFR)
06 -
10
Oct
2024
Istanbul,
Turkey
Data Analysis Techniques
06 -
10
Oct
2024
Cairo,
Egypt
Data Analytics for Drilling Optimisation
06 -
10
Oct
2024
Barcelona,
Spain
ISO 17025 & Laboratory Information Management Systems (LIMS) for Analytical Laboratories
06 -
10
Oct
2024
Cairo,
Egypt
ISO 50001 : Energy Management Systems
06 -
10
Oct
2024
Istanbul,
Turkey
Electrical Engineering, Compliance, Standards and System Fundamentals
06 -
10
Oct
2024
Istanbul,
Turkey
Energy Isolation
06 -
10
Oct
2024
Cairo,
Egypt
Enhancing Efficiency and Reliability in Refinery Process Heaters
06 -
10
Oct
2024
Barcelona,
Spain
Failure Mode Effect and Criticality Analysis (FMECA) Facilitator Skills Training
06 -
10
Oct
2024
London,
United Kingdom
Fitness-For-Service, Remaining Life Assessment & Repair of Pressure Equipment & Piping
06 -
10
Oct
2024
Kuala Lumpur,
Malaysia