Electrical Faults: Causes, Analysis, Detection & Remedies

Tickets

Electrical Faults: Causes, Analysis, Detection & Remedies

Electrical Faults: Causes, Analysis, Detection & Remedies
01 - 05 Dec 2024
Istanbul, Turkey
Turkey

What are the Goals?

At the end of this seminar, you will learn to:

  • Elaborate on the Installation requirements of IEC 60079-14 and some requirements of IEEE standards.
  • Discuss requirements of competent personnel onsite.
  • Demonstrate the correct installation of a variety of Oil and Gas suitable cable Glands and accessories.
  • Apply Health and Safety, Isolation and safe working practice requirements to their workplace.
  • Use a variety of technical information such as schematic diagrams, wiring diagrams and area classification drawings.

Who is this Training Course for?

This course is suitable to a wide range of professionals but will greatly benefit:

  • Electrical and Instrument Technicians
  • Electrical and Instrument Engineers
  • Personnel whose work involves construction of equipment and systems on an Oil & Gas installation
  • Supervisors
  • Design Engineers (for understanding of Installation and Maintenance techniques)
  • Mechanical Maintenance Technicians
  • Mechanical Maintenance Engineers

Daily Agenda

Day One: Introduction and Basic principles

  • Induction
  • Introduction to Health and safety
  • Dangers of Electricity
  • Factors that affect Electric shock
  • Historic background of legislation
  • Examples of Oil & Gas case study incidents
  • Causes of explosion
  • Arc Blasts
  • Common Electrical Safety Rules

Day Two: Basic Principles and General Concepts

  • Common Electrical safety Rules recap
  • Common Electrical Safety Procedures
  • Low Voltage switching operations
  • Live working
  • Battery systems
  • Arc flash/Blast Mitigation
  • Competence levels of personnel (Low Voltage)
  • Introduction to Common Electrical safety documents

Day Three: Protection Concepts

  • Introduction to Common Electrical Safety Documents (Including Electrical Permit to work, Limitation of Access and Sanction for Test)
  • Isolation techniques + Earthing (LV and HV)
  • Basic Introduction to Switching programs and switching logs
  • Switching Exercise
  • Introduction to Technical information used in Oil & Gas Fields (Layout drawings, wiring diagrams, P&ID, etc.
  • Basic Introduction to Hazardous Area Installations (Oil & Gas)
  • Basic Area Classification including (Geometry of release, Release velocity, Ventilation, Relative density)

Day Four: Protection Concepts, Hybrid Systems and Certification Marking

  • Basic Introduction to concepts used in Oil & Gas Installations such as IEC EPL’s, ATEX Categories, Gas groups, Flash point, Ignition Temperature and LEL/UEL.
  • Temperature (T-ratings)
  • Basic introduction to Protection concepts including Ex d, Ex e, Ex n, Ex i and Hybrid systems.
  • Introduction to wiring systems and Glanding

Day Five: Inspection, Wiring Systems and Assessments

  • Certification and marking
  • Basic Introduction to Grades and types of inspection
  • Maintenance considerations
  • End of course theory Assessment (Multi-choice question paper)
  • End of course practical Assessment (Installation of gland into Enclosure)

Tickets

Date & Time
Sunday, December 1, 2024
Start - 11:00 AM (Asia/Kuwait)
Thursday, December 5, 2024
End - 11:00 AM (Asia/Kuwait)

Add to Calendar

Location

Istanbul

Istanbul
Turkey
--Istanbul--

Get the direction

Organizer

Seattle International For Training

info@seattle-int.com
SHARE

Find out what people see and say about this event, and join the conversation.